Log in to access the CPS Educator II Exam, report your activities, and complete the BCAA CPS Educator Competency Review.
Are you participating in a BCAA CPS Educator II Course? Register as a student to complete the self-study activities and online exam.
It starts with proper education. BCAA Child Passenger Safety Educators recommend keeping it simple and focusing on getting the basics right. Here’s what’s key to ensuring your kids are safe when travelling in a car.
Become well-educated on child passenger safety. Understand how to choose the correct seat for your child’s age and size.
Choose a child car seat that meets age, weight and height requirements and complies with Canadian Motor Vehicle Safety Standards (CMVSS). Ensure it fits your child and your car. Find our helpful guide at bcaa.com/carseatsafety.
Always follow the child car seat manufacturer’s instructions and read your vehicle owner’s manual.
If you don’t have paper copies of these manuals, they are available on the manufacturer’s website.
Learn and practice how to correctly install your car seat and secure your child in it.
Research shows that a properly installed child car seat reduces the risk of fatality by 71% and the risk of serious injury by 67% (Transport Canada). Read on to learn common mistakes that parents make when installing and securing kids in car seats, and how to avoid them.
Installing your child car seat
Here are the three most common mistakes and the steps that can be taken to identify and fix them.
1. The child car seat is not tightly secured in the vehicle
Put your hand in the seating area of your child car seat and push down while pulling the seat belt or Universal
Anchorage System connectors tight. To test for tightness, hold both sides of the child seat at the belt path and
firmly move the child seat from side to side and from front to back; there should be no more than 2.5 cm (1 inch)
of movement.
2. The seat belt or Universal Anchorage System (UAS) is threaded through the wrong belt path
This is commonly seen when the child moves from a rear-facing child seat to a forward-facing child seat.
Check your child car seat instructions on how to rethread the seat belt or UAS through the correct belt path for
the rear-facing or forward-facing position.
3. The tether strap is not attached or is too loose
Secure the tether strap hook to the tether bolt in your vehicle, pull the strap until it’s tight. BC law requires the tether strap to be attached on all forward-facing car seats.
Securing your child in their car seat
Here are the three most common mistakes and the steps that can be taken to identify and fix them.
1. The harness straps are not in the correct slots for the rear-facing or forward-facing position
Before buckling your child in their car seat, check the level of the harness straps. If the child seat is to be used
rear-facing, the harness straps must be at or below the level of the child’s shoulders. If the child seat is to be
used forward-facing, the harness straps must be at or above the child’s shoulders. Some infant/child seats
specify which harness slots can be used forward-facing. To change the harness strap slots or to determine which
harness slots can be used, check your child car seat manufacturer’s instructions.
2. The chest clip is out of position
After the harness has been tightened, the chest clip should be done up and adjusted to your child’s armpit level.
3. The harness straps are too loose
Tighten the harness straps so that there’s no more than 1 flat finger between the harness straps and your child’s
collarbone. A snug harness should not allow any slack in the webbing; if you can pinch a fold in the harness
strap, it’s too loose.
List of active CPS Educators who have agreed to be contacts in their community.
The BCAA CPS Educator II Course is a blend of self-learning and hands-on training. Courses are provided in many locations throughout BC.
Information and resources on child car seat safety for parents and caregivers.